Micro LED Driver v2 - 48V - Adjustable 400-1000mA
Micro LED Driver v2 - 48V - Adjustable 400-1000mA
Micro LED Driver v2 - 48V - Adjustable 400-1000mA
Micro LED Driver v2 - 48V - Adjustable 400-1000mA
Micro LED Driver v2 - 48V - Adjustable 400-1000mA
Micro LED Driver v2 - 48V - Adjustable 400-1000mA

Micro LED Driver v2 - 48V - Adjustable 400-1000mA

$ 19.99

New v2 Design: Same shape, more robust protection!

 

Our latest creation to complete your LED build! Made in the USA, this is an all-in-one LED driver similar in function to the Meanwell LDD drivers, in a much more compact size and not requiring expensive carrier boards or plug in modules - its complete out of the box!

The AcroIQ MicroDriver driver is a mere 2.6 x 0.7 inches and can mount right next to your LEDs on T-slot or other heatsinks (due to its small size, mounting in moving air or to a heatsink/metal frame/casework is required). Capable of 48V supply voltages, the driver is fully compatible with any 3.3V or 5V PWM dimming signal from off-the-shelf controllers from blueAcro or others.

The current is adjustable, between 400mA to 1000mA (1 Amp), using an on-board adjustment knob. The current limit works in tandem with PWM dimming!

One driver is capable of driving up to 3 Half-Mega AcroStars, and can be used as a pair to power 5 Mega4Z AcroStars. Up to AcroStrip LEDs can be driven by a single driver.

 

Specifications:

  • Made in the USA
  • 12-48V supply voltage
  • Factory set to 550mA each channel
  • VIn - 3V maximum output voltage (ex. 12V in, 9V out) over the full input range
  • Fully adjustable between 400-1000mA.
  • PWM dimmable over the entire range, including off, by a 120Hz-30kHz 3.3V-5V PWM signal.
  • Push in terminals accepting 20-26 gauge wire are provided for input power and LED connections.
  • 2.6 x 0.7 inches
  • Four #4 mounting screw posts
  • Up to 96% efficient at closely matched Input-Output voltages

Recently viewed